ECoSmart Fires | built-in Bioethanol Fires
EcoSmart Fires are the biggest manufacturers of built-in bioethanol fires. Their technology has been rigorously developed to provide a quality flame that lasts. Bioethanol fires do provide heat, but it is more about the ambience created, and that is why the flame produced is so crucial. Therefore the flame picture is paramount to the quality of the fire. This is something that EcoSmart excel at. All of their fires produce beautiful flames, but these flames don't just look good... they last too. As the burner technology not only aids the flame picture, but also the burn time too.
The Range Explained
The EcoSmart range is based around the burners themselves. Each of these burners can be purchased individually and used within your own setting, or you can combine it with one of EcoSmarts fires, of which there are hundreds of combinations. At the smaller end, you have the VB2 which is designed to drop into existing fireplace inserts. This rescues many a fireplace where the flue has deteriorated to the point where it is unviable to repair and keep a gas fire. With the VB2 you close off the flue and use bioethanol instead.
Next you have the AB3 and the larger AB8. Two circular burners that are used throughout a number of different fires within the 'Portable' range. Again, these can be purchased separately and dropped into fireplaces that you have created.
We then move to the rectangular burners with a line of flame. These range from the XS340 which is 382mm wide, and the BK5 which is just 400mm at the smaller end, before moving to the XL range which includes the 500, 700, 900 and 1200 models.
All of the burners mentioned above are then also available with a range of fireplaces. These range from the small portable fires, through to slightly larger portable fires like the Stix with resembles a wigwam styles camp fire. The particular fire uses the AB3 burner. Beyond what you would normally class as portable are the fire pits and fire tables. The fire pit bowls use the Ab8, whilst the tables utilise the AB8 and XL900 burners.
A complete fireplace | FLEX Fireplaces
If you are looking to have your bioethanol fire as a 'hole in the wall' styled fire insert, then there is the Flex range. Well named, as there are hundreds of options to ensure that you are able to achieve whatever your design requires. The Flex 18 starts at just 578mm wide, with multiple sizes in between that and the Flex 158 which stretches to an impressive 4231mm wide and utilises 3 XL900 burners within it.
The Flex comes complete with it's own firebox, so all you need to do is create the space for it to be mounted within. There are options for every eventuality, so we have detailed those below.
MINIMAL CLEARANCE
Our burners have a minimal clearance requirement which gives you the freedom to create the installation you’ve always envisioned.
Quality & Durability
Crafted from high quality, 304 grade stainless steel, designed to deliver robust performance time after time.
No Flue, Chimney or Connection
There’s no need for a chimney to vent harmful gases, as burning liquid e-NRG bioethanol does not produce any smoke. No utility connections required!
Quick and Easy Installation
No flues or connections to utilities means a simple installation process which brings down the construction costs. Saving you time and money.
Environmentally Friendly
Our burners are fuelled by eco-friendly, renewable energy – e-NRG bioethanol. Derived from plants, bioethanol is much better for the planet.
Enduring Flame
Our burners have large fuel capacities which results in great flames, with long burn times.
Make an enquiry
The Flex models explained
Below we have used the images of the Flex 68 to illustrate the different styles that are available for all of the different model sizes in the EcoSmasrt Flex range.
Flex (size)SS = Single Sided
Flex (size)LC = Left Corner
Flex (size)RC = Right Corner
Flex (size)BY = Bay
Flex (size)PN = Penninsula
Flex (size)DB = Double Sided
Flex (size)IL = Island
Flex (size)BN = Bench
Flex (size)**.BX1 = Log Section Left
Flex (size)**.BX2 = Log Section Both Ends
Flex (size)SS
= Single Sided
Flex (size)LC
= Left Corner
Flex (size)RC
= Right Corner
Flex (size)BY
= Bays
Flex (size)PN
= Penninsula
Flex (size)DB
= Double Sided
Flex (size)IL
= Island
Flex (size)BN
= Bench
Flex (size)**.BX1
= Log Section Left
Flex (size)**.BX2
= Log Section Right
FLEX Single Sided Fireplaces - open to the front only
Flex **SS
Single Sided Firebox
Your traditional 'hole in the wall' styled fireplace insert that is open to the front only.
Image: Flex 50SS
Flex **SS.BXL
Single Sided Box Left
Your traditional 'hole in the wall' styled fireplace insert that is open to the front only, but this time has the log section to the left.
Image: Flex 50SS.BXL
Flex **SS.BXR
Single Sided Box Right
Your traditional 'hole in the wall' styled fireplace insert that is open to the front only, but this time has the log section to the right.
Image: Flex 50SS.BXR
Flex **SS.BXR
Single Sided Box Both Ends
Your traditional 'hole in the wall' styled fireplace insert that is open to the front only, but this time due to it being a larger fire, it has the log section at both ends.
Image: Flex 68SS.BX2
FLEX Corner Fireplaces - open on 2 sides. to the front & one side
Flex **LC
Left Corner Firebox
A slightly less traditional 'hole in the wall' fireplace insert that is open on two sides. The front and the left hand side are both open.
Image: Flex 50LC
Flex **RC
Right Corner Firebox
A slightly less traditional 'hole in the wall' fireplace insert that is open on two sides. The front and the right hand side are both open.
Image: Flex 50RC
Flex **LC.BXL
Left Corner Firebox with a Box for logs to the Left
A slightly less traditional 'hole in the wall' fireplace insert that is open on two sides. The front and the left hand side are both open. Whilst in this model there is also a storage section for decorative logs on the left.
Image: Flex 50LC.BXL
Flex **RC.BXR
Left Corner Firebox with a Box for logs to the Right
A slightly less traditional 'hole in the wall' fireplace insert that is open on two sides. The front and the right hand side are both open. Whilst in this model there is also a storage section for decorative logs on the right.
Image: Flex 50RC.BXLR
FLEX Bay Fireplaces - open on 3 sides. to the front & both sides
Flex **BY
3 Sided Bay Firebox
Definitely not your traditional 'hole in the wall' fireplace insert. This Bay fireplace is open on 3 sides.
Image: Flex 50BY
Flex **BY.BXL
3 Sided Bay Firebox with a Box for the logs to the Left
Definitely not your traditional 'hole in the wall' fireplace insert. This Bay fireplace is open on 3 sides, with the addition of the logs storage section to the left.
Image: Flex 50BY.BXL
Flex **BY.BXR
3 Sided Bay Firebox with a Box for the logs to the Reft
Definitely not your traditional 'hole in the wall' fireplace insert. This Bay fireplace is open on 3 sides, with the addition of the logs storage section to the right.
Image: Flex 50BY.BXR
Flex **BY.BX2
3 Sided Bay Firebox with a Box for logs on both sides
Definitely not your traditional 'hole in the wall' fireplace insert. This Bay fireplace is open on 3 sides, with the addition of the logs storage section on both sides. Only available from the FLEX 68BY upwards.
Image: Flex 68BY.BX2
FLEX Peninsula Fireplaces - open on 3 sides. to the front, Rear & one of the sides
Flex **PN
3 Sided Peninsula Firebox
This Peninsula fireplace is open to the front, rear and one of the sides. It is therefore designed to be a room divider.
Image: Flex 50PN
Flex **PN.BXL
3 Sided Peninsula Firebox with a Box for the logs to the Left
This Peninsula fireplace is open to the front, rear and one of the sides. It is therefore designed to be a room divider. This model has the log storage built into the left hand side of the firebox.
Image: Flex 50PN.BXL
Flex **PN.BXR
3 Sided Peninsula Firebox with a Box for the logs to the Right
This Peninsula fireplace is open to the front, rear and one of the sides. It is therefore designed to be a room divider. This model has the log storage built into the right hand side of the firebox.
Image: Flex 50PN.BXR
Flex **PN.BX2
3 Sided Peninsula Firebox with a Box for the logs to on both sides
This Peninsula fireplace is open to the front, rear and one of the sides. It is therefore designed to be a room divider. This model has the log storage built into sides of the firebox. Only available from the FLEX 68PN upwards.
Image: Flex 68PN.BX2
FLEX Double Sided Fireplaces - open to the front and rear to create a 'tunnel fire'
Flex **DB
Double Sided Firebox
This Double Sided fireplace is open to the front, and the rear to create a fire that you can see all the way through, and which will service two seperate rooms.
Image: Flex 50DB
Flex **DB.BX1
Double Sided Firebox with a Box logs to 1 side
This Double Sided fireplace is open to the front, and the rear to create a fire that you can see all the way through, and which will service two seperate rooms. his has the additional log storage to one side. NOT specified as left or right, as this is reversed when viewing from the front or the back.
Image: Flex 50DB.BX1
Flex **DB.BX2
Double Sided Firebox with a Box logs on both sides
This Double Sided fireplace is open to the front, and the rear to create a fire that you can see all the way through, and which will service two separate rooms. his has the additional log storage on both sides. Only available on the FLEX 68DB upwards.
Image: Flex 50DB.BX2
FLEX Island Fireplaces - open to all sides room divider
Flex **IL
Island ALL Sided Firebox
This Island styled fire is open on all sides and is designed to be used as a room divider.
Image: Flex 50IL
Flex **IL.BX1
Island ALL Sided Firebox with a Box logs to 1 side
This Island styled fire is open on all sides and is designed to be used as a room divider. This model has the additional log storage to one side. NOT specified as left or right, as this is reversed when viewing from the front or the back.
Image: Flex 50IL.BX1
Flex **IL.BX2
Island ALL Sided Firebox with a Box logs on both sides
This Island styled fire is open on all sides and is designed to be used as a room divider. This model has the additional log storage on both sides. Only available on the FLEX 68IL onwards.
Image: Flex 68IL.BX2
FLEX Bench Fireplaces - open to all sides room divider
Flex **BN
Bench ALL Sided Firebox
This Island styled fire is open on all sides and is designed to be used as a room divider. this model differs from the Island in that it has no top section for the fire.
Image: Flex 50BN
Flex **BN.BX1
Bench ALL Sided Firebox with a logs Box to 1 side.
This Island styled fire is open on all sides and is designed to be used as a room divider. this model differs from the Island in that it has no top section for the fire. This particular model has the logs box to one side.
Image: Flex 50BN.BX1
Flex **BN.BX2
Bench ALL Sided Firebox with a logs Box on both sides.
This Island styled fire is open on all sides and is designed to be used as a room divider. this model differs from the Island in that it has no top section for the fire. This particular model has the logs box on both sides of the fire. Only available on the FLEX 68BN upwards.
Image: Flex 68BN.BX2